FreeCAD Part Modeling Tutorial 78

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 77. In this tutorial we will do modeling  in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Also Read-:

Select Top plane and create the below sketch.

Create the Pad of 25 mm as shown in the below image.

Select the face and create the below sketch.

Now create the Pad of 18mm as shown in below image.

Now select the top face and create the below sketch.

Now create the pad of 10mm thickness as shown.

Now select the face and create below sketch.

Now create the extrusion of 42mm as shown in below image.

Create the hole sketch as shown in below image.

Create the Hole as shown in below image.

Create the hole sketch as shown in below image.

Now create the hole sketch as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”