FreeCAD Part Modeling Tutorial 83

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 81. In this tutorial we will do modeling  in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Also Read-:

Select the Right plane and create the sketch.

Create the Pad of 72mm as shown in below image.

Now select the bottom face and create the below sketch.

Now create the cut as shown in below image.

Now create the slot sketch as shown in below image.

Now create the below cut for slot as shown in below image.

Select the face and create the sketch as shown in below image.

Select the cut as shown in below image.

Now create the hole sketch as shown in below image.

Now create the hole as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”