Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 92. In this tutorial we will do modeling in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.
Select the top plane and create below sketch.
Now create the Pad of 16mm as shown in below image.
Now select the back and create below sketch.
Now create the Pad of 16mm as shown in below image.
Now select the face and create below sketch.
Create the Pad of 22mm as shown in below image.
Select the front face of round and project the inner and outer dimeter and create the pad of 22mm as shown in below image.
Now select the face and create below sketch.
Now create the pad as shown in below image.
Now create the Fillet of 25mm as shown in below image.
Now create the Datum plane of as shown in below image along Z direction.
Now on Datum plane create below sketch.
Now create the cut as shown in below image.
Create the hole sketch as shown in below image.
Now create the hole as shown in below image.
Now select the face and create below hole sketch.
Now create cut as shown in below image.
“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”
