Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 96. In this tutorial we will do modeling in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.
Select the front plane and create below sketch.
Now select the face and create below sketch.
Now create the Pad of 42mm as shown in below image.
Now select the top face and create circle of 18mm as shown in below image and create through all cut.
Now select the top face and create below sketch.
Now create the pad of 24mm as shown in below image.
Now create the Cut profile as shown in below image.
Create the cut as shown in below image.
“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”
