Hello friends welcome to FreeCAD Part Modeling tutorial. In this tutorial we will Model Engaging Fork in FreeCAD with the help of Part Design Workbench. If you want to learn FreeCAD from scratch you can buy my Complete FreeCAD 1.0 Course : From Zero to Expert! on Udemy.
You can download this tutorial FreeCAD model with my FreeCAD 3D Model Library with Serial No.254 As shown in below image. once you click on image you will directed to Google drive folder where you will get FreeCAD model and it’s 2D Drawing. If you like my work please support me on ko-fi.com even if it’s just enough to Buy me a Coffee every little helps and this will be repaid in full through my sharing of knowledge.
Step by Step Guide to Model Bracket in FreeCAD-:
Select the Front Plane and Create below sketch.
Now create the Pad of 40mm as shown in below image and keep pad symmetric to plane.
Now select the top face and create diameter of 40mm as shown in below image.
Now create the cut as shown in below image.
Now select the face and create below sketch.
Now create the Pad of 120mm as shown in below image and never forget to make it reversed.
Select the face and create the below sketch never forget to make dimension 20mm symmetric.
Now create the cut as shown in below image.
Now create datum plane as shown in below image.
Now on datum plane create below sketch and create two separate profile.
Now create the pad of 11mm as shown in below image.
Now create the pad of 15mm as shown in below image.
Now select the face and create hole sketch.
Create the hole as shown in below image.
Now create the fillet of 2mm as shown in below image.
“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”
