Model Index Guide in SolidWorks

Hello friends welcome to SolidWorks Part Modeling tutorial.  In this tutorial we will do modeling  of Index Guide in SolidWorks. You can download this SolidWorks Tutorial File from my Ko-Fi Store.  If you want to learn SolidWorks from scratch you can buy my SolidWorks Complete Course on Udemy.

Related Posts-:

• Model Clutch Lever in SolidWorks
• Model Column Support in SolidWorks
• Model Control Block in SolidWorks

Step by Step Guide to Convert below Drawing into 3D Model -:

Select the top plane and create below sketch.

Now add the material to the distance of 0.44 inch As shown in below image.

Now select the bottom face and create below sketch.

Now Add the material to the distance of 3 inch As shown in the below image.

Give the fillet of 1 inch As shown in below image.

Select the face and create circle of diameter 2 Inch As shown in below image.

Create the pocket As shown in below image.

Select the face and create below sketch.

Create the hole As shown in below image.

Select the face and create below slot sketch.

Create the Pocket As shown in below image.

Select the face and create below cut profile.

Create the cut As shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”