0:00
friends welcome to Free cat tutorial and
0:03
in this tutorial we will learn how to
0:06
measure Arc dimension in freecad with
0:10
manipulator workbench
0:12
in free CAD in part workbench or part
0:18
we Face difficulty to measure this Arc
0:21
Dimensions if we switch to the part
0:23
workbench here are the measuring tools
0:27
are given but this measuring tools are
0:29
only beneficial to measure the linear
0:33
what if if you want to measure the
0:35
dimension of this Arc or this diameters
0:42
you will not any find any options here
0:47
a part design workbench here
0:49
so in this tutorial we will install the
0:53
manipulator workbench to do that go to
0:56
the tool and go to the add-on manager
0:58
and search for the manipulator
1:07
so here you can install this manipulator
1:14
and here I show you the measuring tools
1:17
inside the manipulator workbench so this
1:19
is the manipulator workbench and before
1:22
I will go to the part here part
1:24
workbench so you can see that
1:26
there is a no tool for the arc here but
1:29
in manipulator there are the many tools
1:33
so here I switched to the manipulated
1:37
here on manipulator tools you will see
1:39
here a Vernier caliper click on it
1:42
and here you can measure the arc aligns
1:49
so I will switch to the isometric
1:52
I will select on this Arc
1:55
and I will select on this
2:11
radius is 6 diameter is 12 and here in
2:16
tree browser it this value has been
2:19
added here if you do not want this
2:21
precise value just simply click on the D
2:24
and again if you measure it then it will
2:27
not show you this this much of precise
2:29
value it will show you only
2:37
and if I click on this aligns dimension
2:42
so this is the Align Dimension after
2:43
beautiful it is showing
2:46
and if I wanted to see the angle
2:53
so angle is 30 degree
2:58
and if you click on clear actions it
3:02
will clear it and if you want to delete
3:10
tools is very helpful
3:13
to measure the dimension in freecat and
3:17
here are the snap points
3:21
snap to the circle mid point or end
3:25
so this is the very small tutorial about
3:28
the manipulator workbench to measure the
3:33
which which is not available in a part
3:39
I hope you'll have liked this tutorial
3:42
and at the same time if you like my
3:44
method of teaching then you can support
3:46
me on kofi.com its link is given in a
3:49
video description and at the same time I
3:52
would request you to please like
3:54
subscribe and Share my video your small
3:57
support will help these channels to grow
3:59
I will come with more useful tutorial on
4:02
free CAD thank you for watching and
4:05
thank you for your valuable time
