Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned Sheet Metal Part Design Tutorial 02. In this tutorial we will do modeling in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.
Step by Step Guide to Convert below drawing into 3D Model -:
Select the right plane and create below sketch.
Create the length of 30mm, thickness 3mm and radius 1mm As shown in below image.
Extend the face with below parameter As shown in below image.
Create the fillet of 15mm As shown in below image.
Create the fillet of 15mm As shown in below image.
Create the hole sketch As shown in below image.
Create the hole As shown in below image.
Create the hole sketch As shown in below image.
Create the hole As shown in below image.
Create the below sketch As shown in below image.
“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”
