FreeCAD Part Modeling Tutorial 64

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have did FreeCAD part modeling tutorial 56 in this tutorial we will do FreeCAD Part Modeling Tutorial 55 with the help of Part design workbench of FreeCAD.  You can also download my source file of the tutorial at https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Also Read-:

Also Read-:

Step by Step Guide to Convert below drawing into 3D Model -:

Select the XY plane and create the circle.

Now create the pad of 45mm and 5mm as shown in below image.

Now Select the plane and create the below profile.

Now create the pad of 10mm as shown in below image.

Now select the face and create the below profile.

Now create the pad in two direction as shown in below image.

Now select the face and create the below profile.

Now extrude the profile up to face as shown in below image.

Now select face and create the below profile.

Now create the cut of 10mm as shown in below image.

Now select the bottom face and create the shown profile.

Now create the cut of 10mm as shown in below image.

Now create the fillet of 15mm as shown in below image.

Now select the face and create the below profile.

Now make the cut as shown in below image.

Now select the face and create the circle of 16mm.

Now create the cut as shown in below image.

Now select the face and create below profile.

Now create the pad as shown in below image.

Noe create the profile and remove the material.

Here complete our tutorial.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”