Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 79. In this tutorial we will do modeling in FreeCAD with the help of Part design workbench of FreeCAD.
You can also download my source file of the tutorial at https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.
Also Read-:
| Model Hinge Block in FreeCAD |
| Model Socket Bearing in FreeCAD |
| Model V Block in FreeCAD |
Select the top plane and create the below sketch.
Create the Pad of 19mm as shown in below image.
Select the face and create the below profile.
Create the pad of 19mm as shown in below image.
Select the back face and create below sketch.
Create the Pad as shown in below image.
Create the slot sketch as shown in below image.
Now create the slot as shown in below image.
Now create the fillet as shown in below image.
Create the hole sketch as shown in below image.
Create the hole as shown in below image.
Select the face and create the below sketch.
Create the Cut as shown in below image.
“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”
