FreeCAD Part Modeling Tutorial 81

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 80. In this tutorial we will do modeling  in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Also Read-:

Select the front plane and create below sketch.

Now create the pad of 74mm as shown in below image.

Now create the fillet as shown in below image.

Now select the top face and create the below sketch.

Now create the cut as shown in below image.

Now Mirror the feature as shown in below image.

Now select the face and create the sketch.

Now create the extrude to length 65mm as shown in below image.

Now create the fillet of 5mm as shown in the below image.

Now create the chamfer of 3mm as shown in the below image.

Create the Hole Sketch shown in below image.

Create the hole as shown in below image.

Create the Hole Sketch as shown in below image.

Create the hole in shown image.

Create the Hole sketch as shown in below image.

Create the cut as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”