FreeCAD Part Modeling Tutorial 82

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 81. In this tutorial we will do modeling  in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Also Read-:

Select the front plane and create below sketch.

Now create the revolve as shown in below image.

Now select the mid plane and create below sketch.

Now mirror the feature with respect to YZ plane as shown in the below image.

Now select the mid plane and create the below sketch.

Now mirror the feature as shown in below image.

Now select the top face and create below sketch.

Now create the cut of 50mm as shown in below image.

Now mirror the feature with respect to XZ plane as shown in below image.

Now select the face and create below sketch for hole.

Now create the hole as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”