FreeCAD Part Modeling Tutorial 87

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 85. In this tutorial we will do modeling  in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Also Read-:

Select the Right Plane and Create Below sketch.

Create the Pad of 40mm as shown in below image.

Select the face and create below sketch.

Create the Cut as shown in below image.

Select the mid plane and create below sketch.

Now create the Pad of 20mm as shown in below image.

Now create the fillet of 10mm as shown in below image.

Now Mirror the feature as shown in below image.

No select the face and create circle of 38mm as shown in below image.

Now extrude the the circle as shown in below image.

Now create the circle a shown in below image.

Now create the cut as shown in below image.

Now select the face and create below sketch.

Now create the cut of 10mm as shown in below image.

Now select the face and create below sketch.

Now create the Hole as shown in below image.

Now select the face and create hole sketch.

Now create the hole as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”