FreeCAD Part Modeling Tutorial 88

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 87. In this tutorial we will do modeling  in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Also Read-:

Select Right Plane and create below sketch.

Now revolve the sketch as shown in below image.

Now Create the Datum Plane as Shown in below image.

Now select the Datum Plane and create below sketch.

Now create the Extrude of 40mm as shown in below image.

Now select the face and create below sketch.

Now create the cut as shown in below image.

Now Mirror the feature as shown in below image.

Create the below sketch as shown in below image.

Create the Cut as shown in below image.

Now Mirror the cut as shown in below image.

Now create the Hole sketch as shown in below image.

Now create the hole as shown in below image.

Now create the hole sketch as shown in below image.

Now create the hole as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”