Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 106. In this tutorial we will do modeling in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.
Also Read-:
| Easily Rotate Sketch in FreeCAD |
| Create Keyboard Short cut in FreeCAD |
| Easily Slice Part with Plane in FreeCAD |
Step by Step Guide to Convert below drawing into 3D Model -:
Select the top plane and create below sketch.
Create the Pad of 10mm as shown in below image.
Select the side face and create below sketch.
Create the Pad as shown in below image.
Select the mid plane and create below triangle profile.
Create the Pad of 10mm As shown in below image.
Create the below cut profile as shown in below image.
Create the cut set end condition through all as shown in below image.
Give the fillet of 10mm as shown in below image.
Create the slot profile as shown in below image.
Create the Cut as shown in below image.
Project the outer radius and create below hole profile as shown in below image.
Create the hole as shown in below image.
Project the outer radius and create below profile.
Create the pad of 2mm of above profile as shown in below image.
Select the top face and create hole of 8mm as shown in below image.
Create the hole cut as shown in below image.
“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”
