Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 83. In this tutorial we will do modeling in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.
Also Read-:
| Let’s Explore the FreeCAD user Interface |
| List of Supported File Formats in FreeCAD |
| Beginner Guide to Computer Aided Design |
Select the top plane and create your below sketch.
Create the Pad of 20mm as shown in below image.
Select the face and create the sketch as shown in below image.
Create the cut as shown in below image.
Select the face and create below sketch as shown in below image.
Now create the pad of 18mm as shown in below image.
Select the face and create below sketch as shown in below image.
Create the below cut as shown in below image.
Select the face and create the below sketch.
Create the Cut of 10mm as shown in below image.
“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”
