Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 85. In this tutorial we will do modeling in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.
Also Read-:
| How to use Multi View in FreeCAD Drawing |
| Let’s understand FreeCAD Part Workbench |
| Let’s Explore Basics of the FreeCAD |
Step by Step Guide to Convert below drawing into 3D Model -:
Select the top plane and create below sketch.
Create Pad of 10mm as shown in below image.
Select the face and create below sketch by projecting arc as shown in below image.
Create the Pad as Shown in below image.
Select the face and create below sketch.
Create the Cut of 6mm as shown in below image.
Select the face and create the below slot sketch.
Create the Pad of 4mm as shown in below image.
Now select the face and create below slot sketch.
Create the cut as shown in below image.
Select the face and create below sketch.
Create the cut as shown in below image.
Select the face and create below sketch.
Create the hole cut as shown in below image.
“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”
