Model Control Bracket in SolidWorks

Hello friends welcome to SolidWorks Part Modeling tutorial.  In this tutorial we will do modeling  of Control Bracket in SolidWorks. You can download this SolidWorks Tutorial File from my Ko-Fi Store. If you want to learn SolidWorks from scratch you can buy my SolidWorks Complete Course on Udemy.

Also Read-:

Step by Step Guide to Convert below drawing into 3D Model -:

Select the right plane and create below sketch.

Now create revolve As shown in below image.

Now select the bottom face and create below sketch.

Now create the Pad of 8mm As shown in below image.

Now Project the radius and create below sketch profile.

Select the Face and Create below sketch.

Now create the hole As shown in below image.

Now mirror the feature As shown in below image.

Now select the top face and create below sketch & create the Pad of 40mm As shown in below image.

Now project the horizontal and Vertical edge and create below sketch profile and Remove the material.

Now project the edge and create below sketch.

Now remove the material As shown in below image.

Now project the radius and create the circle As shown in below image.

Now create the pad of 3.5mm As shown in below image.

Now mirror the feature As shown in below image.

Select the face and create circle of diameter 15mm As shown in below image.

Create the cut As shown in below image.

Now create the Datum plane As shown in below image.

Now on Datum plane create below sketch.

Now create the Pad of 9mm As shown in below image.

Now select the top face and create below slot sketch.

Now create the pad of 3mm As shown in below image.

Now select the top face and create below slot sketch.

Now create the pocket As shown in below image. set end condition up to surface. you can also set it to through all.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”