Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned Model Stud Guide in FreeCAD. In this tutorial we will do modeling of Model Shifter in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial. If you want to learn FreeCAD from scratch you can buy my The Complete FreeCAD Course : From Zero to Expert! on my Ko-Fi Shop. This Course is also available on Udemy at below link The Complete FreeCAD Course 2024: From Zero to Expert! but the dark side is that Udemy take 63% of revenue. I request to buy from my Ko-Fi shop It will help me a lot.
Also Read-:
FreeCAD Part Modeling Tutorial 33 |
FreeCAD Part Modeling Tutorial 34 |
FreeCAD Part Modeling Tutorial 47 |
Select the front plane and create the below sketch.
Now extrude the profile to 40mm as shown in the below image.
Now create the datum plane at distance of 45 as shown in the below image.
Now create the below profile on datum plane.
Now create the below pad as shown in the below image set end condition up to face.
Now select the profile and create below sketch and set inner diameter to 12.5mm.
Now mirror the profile as shown in the below image.
Now create the datum plane at distance of 12mm as shown in the below image.
Now select the datum plane and create the below sketch.
Now extrude the above profile to distance of 10mm as shown in the below image.
Now create the datum plane at distance of 5mm as shown in the below image.
Now select the datum plane and create the below sketch.
Now create the pad of 13mm as shown in the below image.
Now create the chamfer both the side as shown in the below image.
“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”