Modeling of Slotted Guide in FreeCAD

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned Model Holder Block in FreeCAD.  In this tutorial we will do modeling of Slotted Guide with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Also Read-:

Select the front plane and create the below sketch.

Create the padof10mm as shown in the below image.

Create the slot sketch as shown.

Create the slot as shown.

Select the face and create the below sketch.

Create the pad of 50mm as shown in below image.

Now select the face and create the sketch.

Create the cut of 12mm as shown in below image.

Select the face and create the hole sketch.

Now create the hole as shown.

Mirror the hole as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”