Model Holder Block in FreeCAD

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned Model Mounting Bracket in FreeCAD.  In this tutorial we will do modeling of Holder Block with the help of Part design workbench of FreeCAD.

You can also download my source file of the tutorial at https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Select the top face and create the below sketch.

Now extrude the sketch to 16mm as shown in below image.

Now select the face and create below sketch as shown.

Now remove the material for sketch.

Create the sketch profile as shown in below image.

Now remove the material as shown.

Select the top face and create the below sketch.

Now add the material to length of 48mm as shown

Now select the face and create the sketch as shown in image.

Now remove the material as shown.

Now select the top face and create below sketch.

Remove the material to length of 28.6 mm as shown in below image.

Create the hole sketch as shown in below image.

Create the hole as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”