FreeCAD Part Modeling Tutorial 74

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned Model Guide Link in FreeCAD. In this tutorial we will do modeling  in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Also Read-:

Select the top plane and create the below sketch.

Now create the Pad of 4.4mm as shown in the below image.

Now select the Top face and create the below sketch.

Now create the pad of 11.6mm as shown in the below image.

Now select the top face and create the below sketch by projecting outer edges.

Now create the cut of 5mm as shown in the below image.

Now select the inner face and create the below hole sketch.

Now create the hole as shown in the below image.

Now select the face and create the sketch as per shown image.

Now Create the Counterbore Hole as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”