Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 76. In this tutorial we will do modeling in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial. If you want to learn FreeCAD from scratch you can buy my The Complete FreeCAD Course : From Zero to Expert! on my Ko-Fi Shop. This Course is also available on Udemy at below link The Complete FreeCAD Course 2024: From Zero to Expert! but the dark side is that Udemy take 63% of revenue. I request to buy from my Ko-Fi shop It will help me a lot.
Also Read-:
Model Hinge Block in FreeCAD |
Model Socket Bearing in FreeCAD |
Model V Block in FreeCAD |
Select the top plane and create the below sketch.
Now create the Pad of 10mm as shown in the below image.
Select the face and create the sketch.
Create the Pad of 10mm as shown in the below image.
Project the edge and create below sketch.
Now create the Pad of 2mm as shown in below image.
Now select the face and create hole sketch of 22mm as shown in below image.
Now create the hole as shown in below image.
Now select the mid plane and create the below sketch.
Now create the Pad of 10mm as shown in the below image.
Now create the Fillet as shown in below image.
Now Project the edge and create below hole sketch.
Now create the Hole as shown in the below image.
“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”