FreeCAD Part Modeling Tutorial 137

Hello friends welcome to  FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 136. In this tutorial we will do modeling  in  FreeCAD with the help of Part design workbench of  FreeCAD. You can also download my source file of the tutorial at https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Also Read-:

Select the right plane and create below sketch.

Create the revolve profile as shown in below image.
Create below sketch profile for cut. 
Now create the cut of 5mm as shown in below image.
Now mirror the cut as shown in below image with respect to XZ plane.Create the cut as shown in below image.
Now create the Through Cut as shown in below image.
Now create the Fillet of 10mm as shown in below image.
Now polar pattern above feature as shown in below image.
Now create the fillet as shown in below image.
Now create the Chamfer of 1mm as shown in below image.

Select the face and create below sketch.

Now create Cut as shown in below image.

Now create datum plane with respect to XY Plane As shown in below image.

Select the datum plane and create hole sketch.

Now create the hole as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”