Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 145. In this tutorial we will do modeling in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.
Also Read-:
Step by Step Guide to Convert below drawing into 3D Model -:
Select the right plane and create below sketch.
Create the Pad and create extrusion of 80mm As shown in below image.
Select the face and create the below sketch.
Now Mirror the above cut As shown in below image.
Now Select the face and create below image.
Now create the counterbore hole As shown in below image.
Now select the face and create below sketch.
Now create the hole As shown in below image.
Now select the face and create below sketch.
Now create the pocket As shown in below image.
Now give the chamfer of 1mm As shown in below image.
“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”
